LAIMET 130
The LAIMET 130 is our premium model, the most robust circular saw mill on the market.
The robust double body the size of the central part of the whole saw of LAIMET 120 and 130 ensures the straightness of the body in hard sawing and transport conditions. Even very large logs can be handled without fear of breaking with the LAIMET 130. LAIMET 130 has the most robust, extra thick saw table structure on the market.
LAIMET 130 is suitable for saw works as a movable version and as a non-movable facility saw. Our extensive range of accessories enables to equip the saw to a one-man saw, minimising the need for manpower.
To saw very large logs safely and efficiently, our upper blade TOPSAW is available for LAIMET 120 and 130.
LAIMET 120 and 130 are also available as reversible RH-versions for specialty wood. In this version the places of the log feeder and measuring device are switched. The placement of the devices gives the operator the possibility to see the sawing marks on the beam without having to reach far. This allows the operator to choose whether to continue sawing or move the beam.
Basic equipment for LAIMET 130, stationary unit
- Strong steel frame
- Steel profile saw table, 9 meters
- Steel pipe rollers with ball bearings
- Hydraulic feeding unit
- Blade shaft 65 mm and hydraulic blade guiding equipment
- Mechanical dimensioning system
- Feeding roller, operated by a separate hydraulic motor
- Stationary support legs
- Slab support stand
- Safety equipment
Extra equipment:
- Sawdust fan 4 kW / 400 V or with v-belt drive from the blade shaft
- Sharpening / grinding device 0,55 kW / 400 V or 12 V
- Electric main motor 55 kW
- Automatic delta-star starter (for 55 kW) with the DC-brake and for 4 kW fan motor
- Fastening rails for electric motor 55 kW
- V-belt transmission for 55 kW main electric motor or v-belt grooved shaft transmission for tractor drive setup
- U-J shaft for tractor drive
- Slipper bars for ready sawn timber and waste slabs
- Hydraulic discharge equipment for sawn timber
- Self bearing exit end for the discharge equipment
- Separate hydraulic pump unit with ekectric motor 7,5 kW / 400 V
- Thermostat controlled heating element in the oil tank
- Double chain for the saw table + longer receiving frame end
- Hydraulic log directing / turning device
- Lengthwise moving (by hydraulics) log directing / turning device
- Digital dimensioning equipment
- Hydraulic block positioning system to the digital dimensioning equipment
- Hydraulic TOPSAW-equipment
- TOPSAW
- Equipment with the electric motor 13,2 kW or 18,0 kW
- Hydraulic log hook
- Hydraulic pre-parker
- Hydraulic slab wheel on the operators side
- Hydraulic log lifter
- Hydraulic log rationing unit
- Operators platform
- Heating for the operators platform
- Rubber vulganized, quiet table rollers
- Double chain for the saw table + longer receiving frame end
- Longer double middle frame balks (6 m) in the case of stationary log turning device
- Extended length, saw table and frame construction
- The load sensing hydraulic sytem, incl. the piston pump and 11 kW electric motor
Basic equipment for LAIMET 130, portable unit
- Strong steel frame
- Steel profile saw table, 9 meters
- Steel pipe rollers with ball bearings
- Hydraulic feeding unit -Blade shaft 55 mm and hydraulic blade guiding equipment
- Mechanical dimensioning system
- Feeding roller, operated by a separate hydraulic motor
- Tow bar for tractor transportation
- Hydraulic transport axle
- Transport wheels 400 x 15,5
- Four hydraulic support legs in the middle section, mechanical support legs at the end sections
- Hydraulically liftered and lowered exit end for the transport purposes
- Weather canopy and working lights
- Tail end lights
- Tool box
- Hydraulic log lifters
- Saw dust duct with support post
- Slab support stand
- Operators platform
- Safety equipment
Extra equipment:
- Sawdust fan V-belt driven from the blade shaft
- Sharpening / grinding device 12 V motor
- V-belt grooved shaft transmission for tractor drive setup
- U-J shaft for tractor drive
- Slipper bars for ready sawn timber and waste slabs
- Hydraulic discharge equipment for sawn timber
- Hydraulic log directing / turning device
- Lengthwise moving (by hydraulics) log directing / turning device
- Digital dimensioning equipment
- Hydraulic block positioning system to the digital dimensioning equipment
- Hydraulic TOPSAW-equipment
- Hydraulic log hook
- Hydraulic pre-parker
- Hydraulic slab wheel on the operators side
- Double chain for the saw table + longer receiving frame end
- Rubber vulganized, quiet table rollers
- Heating for the operators platform